banner



How To Change Heater Hose On 2006 Ford Focus

CODING List <PHEV>



caution With the ETACS functions being customised, if one or more of the ETACS-ECU variant coding and option coding items are inverse, the customised contents are reset. In such case, the functions need to be customised once more.
Earlier troubleshooting, check that the coding information written into the engine-ECU, the SRS-ECU, the ETACS-ECU and the PHEV-ECU are normal. If they are non the same equally the initial settings, various functions and systems exercise not work commonly.

VARIANT CODING


The coding data can be checked by operating G.U.T.-3.


annotation For details on how to apply the M.U.T.-III, refer to the "Yard.U.T.-3 performance manual."
1.The power supply way of the electric motor switch should be turned off.
ii.Start up the personal estimator.
three.<When the special tool V.C.I.-Lite (MB992744) is used>
Connect the special tool V.C.I.-Lite USB cable (MB992747/MB992748) to the V.C.I.-Light and the personal estimator.
<When the special tool 5.C.I. (MB991824) is used>
Connect the special tool Five.C.I. USB cable (MB991827) to the V.C.I. and the personal calculator.
4.<When the special tool V.C.I.-Lite (MB992744) is used>
Connect the special tool Yard.U.T.-Iii V.C.I.-Lite main wiring harness A (MB992745) to the V.C.I.-Calorie-free.
<When the special tool V.C.I. (MB991824) is used>
Connect the K.U.T.-III primary wiring harness A (special tool: MB991910) to the Five.C.I.
5.<When the special tool 5.C.I.-Light (MB992744) is used>
Connect M.U.T.-III V.C.I.-Lite chief wiring harness A to the diagnosis connector.
<When the special tool Five.C.I. (MB991824) is used>
Connect K.U.T.-III V.C.I. master wiring harness A to the diagnosis connector.
vi.<When the special tool V.C.I.-Light (MB992744) is used>
Turn the 5.C.I.-Light power switch to the "ON" position.
note When the V.C.I.-Light is energised, the V.C.I.-Low-cal indicator lamp will be illuminated in green.
<When the special tool V.C.I. (MB991824) is used>
Turn the Five.C.I. ability switch to the "ON" position.
note When the V.C.I. is turned ON, the V.C.I. indicator lamp will be illuminated in green.
7.Start the M.U.T.-Three organization on the PC and turn on the power supply way of the electric motor switch.
8.On "System selection" screen, select "MPI/GDI/Diesel" for engine-ECU related data, "SRS-AIR Handbag" for SRS-ECU related information, "ETACS" for ETACS-ECU related data, "PHEV-ECU" for PHEV-ECU related data, respectively.
9.Select "Coding."
10.Select "Coding information & copy."
11.
caution Refer to the "One thousand.U.T.-Three operation manual" and perform coding.
If the displayed coding data is dissimilar from the corresponding initial setting in the list, supplant the ECU with a correctly coded i. When the engine-ECU is replaced, refer to GROUP 13E - Engine-ECU . When the SRS-ECU is replaced, refer to GROUP 52B - SRS Control Unit . When the ETACS-ECU is replaced, refer to GROUP 54A - ETACS . When the PHEV-ECU is replaced, refer to Group 54D - PHEV-ECU .

ENGINE ECU CODING DATA List


note The items to be displayed may differ depending on the version of the Chiliad.U.T.-III.
Particular name
Initial value
Vehicle Model
OUTLANDER PHEV
Model yr
(Displays the model yr)
Destination
EUR
Engine type
4B11 D4 MIVEC
South/W variation
No.1

SRS-ECU CODING Information List


note The items to be displayed may differ depending on the version of the M.U.T.-III.
Item name
Initial value
DR airbag squib(1st)
Present
PS airbag squib(1st)
Present
DR airbag squib(2nd)
Not present
PS airbag squib(2nd)
Not nowadays
DR pretensioner squib
Present
PS pretensioner squib
Present
PS lap pretensioner squib
Non nowadays
RH side airbag squib
Present
LH side airbag squib
Present
RH pall airbag squib
Present
LH curtain airbag squib
Present
DR knee airbag squib
Present
Occupant nomenclature module
Not present
DR seat position sensor
Non present
Seatbelt warning indicator(CAN)
Not present
PS cut off SW
Nowadays
DR buckle SW (mecha)
Non present
DR buckle SW (hall)
Non present
PS buckle SW (mecha)
Not present
PS buckle SW (hall)
Non present
Passenger'south SRS OFF lamp
Present
Passenger'due south SRS ON lamp
Present
LH front G sensor
Nowadays
RH forepart G sensor
Present
RH side sensor B-pillar
Present
LH side sensor B-colonnade
Present
Roll over sensor
Not nowadays
Disposal
Present
High volt.cutoff
Present
Emergency call
Non present
Crash parameter flag(#0)
on

ETACS-ECU CODING Data LIST


notation The items to exist displayed may differ depending on the version of the M.U.T.-III.
Particular name
Initial value
Vehicle line
C-SUV(PHEV)
Model yr
(Displays the model yr)
Handle side
LHD or RHD
Destination
EUR
Transmission
TRANS AXLE
Engine type
4B11 D4 MIVEC
Smart entry system
Blazon B
Keyless entry
Present
Immobilizer
Type A
WCM/KOS
Present
Panic Alert
Enable
OSS
Nowadays
KOS LF output
Blazon 3
KOS SW type(Gate/torso)
Gate 2SW
Engine Type for OSS
EV
Transmission Type for OSS
Undefined
TPMS*1
Not present
TPMS information
Due north/A
TPMS Off mode function
Not present
Sound
Not present/Nowadays
AND
Not present/Present
Destination for HFM
EUR
Amusement Vehicle Line
OUTLANDER PHEV
Entertainment model year
(Displays the model year)
Radio Frequency
EUR
Number of speaker
Premium RF or half-dozen speakers
AUX equipment
Not Present
KOS door entry type
Switch
Corner sensor control unit
Not present/Nowadays
CAMERA
Non present
Rear view photographic camera
Not present/Present
Nose view camera
Not present
Left side view camera
Not present
FCM function
Non present/Nowadays
FCM type
Undefined/Blazon one
ACC type
Undefined/Type 12
ACC
Not present/Present
ACC function
Not present/Present
Remote engine starter
NotPresent/ChgOk
IG central illumination
W/ getting off
Condolement flasher type
Nowadays/Chg Ok
Trailer turn detection
Nowadays
Front wiper
Rain Sensitive
Later wipe customize
Enable(def.E)
Rear wiper mode
With Lo control
Rear wiper by opposite customize
Enable(d.FR/RR)
Auto fold mirror
Keyless/KOS
Way Switch
NotPresent/ChgNg
Motorcar lamp command
Hullo RLS/Chg Ng
Coming dwelling lamp customize
Enable(def.E)
Welcome lamp customize
Enable(d.Small-scale)
Room lamp delay timer/door & H/L
Short
Room lamp by H/L
Full
Gate/Trunk lamp
Style-2 (cargo)
Head lamp machine cut
Enable
Caput lamp auto cut manner
B spec.
Door Unlock Manner Customize
Disable/Customize Enable
Door unlock by IG lock customize
Disable/Enable(def.D)
Key reminder unlock
Disable
Horn chirp by keyless
NotPresent/ChgNg
Security alarm function
NotPresent/ChgOk
Security warning mode
Non present/A-spec
Pre-alarm
Not nowadays/Present
Security alarm sensor
Non nowadays/Present
Security alert siren
Non nowadays/Present
Security sensor gain setting
Blazon 1/Type 3/Type four
Siren answer
Disable
EV REMOTE-ECU
Not present/Present
Security type(EV REMOTE)
Not Present/Blazon A
Security alarm(EV REMOTE)
Non present/Present
Door control(EV REMOTE)
Not present
Panic Alert control(EV REMOTE)
Not nowadays
Position lamp control(EV REMOTE)
Not present/Present
Head lamp command(EV REMOTE)
Not present/Nowadays
Horn command(EV REMOTE)
Non present
Battery reminder(EV REMOTE)
Not present
Battery accuse(EV REMOTE)
Non present/Present
Pre-A/C control(EV REMOTE)
Not present/Present
Power window type
Type five(NAFTA)
Ability window Dr
Not present
Power window As
Non present
Ability window RR
Not present
Power window RL
Not present
Multi mode RKE
Present
Gate/Torso
Gate type
RLS overwipe type
Type 1/Type 2
RLS WS type
Type 2 (Light-green)
RLS
Present
RLS Communication Type
LIN/Tin can
LDW equipment status
Not Present/Type B
LDW Parameter status
Not parameter/Type 5/Type half dozen
LDW product setup status
LDW production setup status
LDW
Not present/Present
ORC
Nowadays
DRL blazon*
Contained DRL
DRL function
Nowadays/Chg Ng
Electric Slide door (Left)
Not nowadays
Electric Slide door (Right)
Non present
Sun roof type
Not present/Type S2
Dominicus roof
Not present/Present
Rear S/R Unlock Output
Not present
ETG
Not present/Present
Head lamp
4 beams
Caput lamp washer
Disable/Popup2 westward/ washer
Fold mirror
Enable
Front fog lamp mode
B spec.
Front fog lamp
Present
Rear fog lamp
Nowadays/Chg Ng
Door lock system
B-Spec/exceptUSH/E-spec/exceptDLH
Gate/torso opener mode
Present(Type 1)
Horn blazon
Dual horn
H/L leveling type
Not present/2 height sensor
Head Lamp Leveling system type
OUTLANDER PHEV
Rear wiper
Enable
Wiper washer cheque valve
Present
Inteligent/Comfort washer custom
Enable(def.Due east)
ESS by turn lamp
Nowadays
Turn point bulb
21/21/21/21/0.36
ESL
Not nowadays
Final drive
4WD FF Base
T/Thou oil cooler
Not present
S-AWC
Not present
TCM
Not nowadays
Shift lock
Non present
Manual control type
Def./Not present
Boilerplate speed
Not available
Coolant temp gauge threshold
Normal
Vehicle linguistic communication status
English
Fuel consumption calibration
50/100km/MPG (UK)
Tyre circumference
2155mm
Frost warning threshold
EUR
Distance to empty
Not available
Boilerplate fuel consumption
Available
Instant fuel consumption
Non available
Seat belt reminder logic
Eu
Rear door type
Swivel
Shift Display Layout
RHD
Trip autoreset IG OFF
Available
GCC speed alarm indicator
Not nowadays
As&Grand status
Not present
Gear shift reminder
Nowadays
Opposite warning
Not bachelor
Seat belt reminder command type
Non AABT
Charging Fourth dimension Display
Nowadays
Seat belt reminder indicator
D&P independent
Central reminder
Not available
Brake vacuum warning
Nowadays
GCC speed warning
Non bachelor
Rent-a-car style IG-OFF ever
Available
S-AWC Control display
Bachelor
Service reminder schedule table
Normal
Display opening type
OEM1
Language mode
Available
Fuel tank type
Blazon two
GSI organization
Not present
Launch gear block alarm
Not present
Service reminder for month
12 month
Service reminder for km
20000km
Service reminder for mile
12500mile
Drive way
Present
A/C control type
EUR
ECO guess
Not present
ECO score
Nowadays
Electric motor switch reminder
Nowadays
Gate/Trunk
Gate type
Steering Wheel Switch
Present
Altitude to empty(PHEV)
Present
Energy Flow
Present
EV ratio
Nowadays
Exterior temperature
Present
ECO SW(Except for PHEV)
Not present
OCM
Not present
A/C
Present
Indirect lamp
Non nowadays
Room lamp Heart Switch
Not present
Compressor blazon
Type 6
Temperature type
Celsius
Selection Heater
Not present/Present
Indirect lamp type
Type1/No present
Heater Control Panel Type
Dual LCD
EPS
Present
EPS type
Type ii
ABS
Not present
Vehicle Type for A.Southward.C.
Type 5
Brake Type for A.Due south.C.
Type 2
HBA Type
Type 1
ABS Type
Type 1
TCL Type
Type 14
A.South.C Type
Type 5
A.Due south.C.
Nowadays
HSA Blazon
Type 1
As&G brake hold Blazon
Not nowadays
Brake prefill
Present
Brake fade support
Not present
Southward-AWC Brake
Present
Enhanced TCL
Not present
TSA Type
Not present
ACC Type for A.S.C.
Not present/Type 4
FCM Type for A.S.C.
Not nowadays/Type ane
Engine power
Normal
Water split up warning
Not present
Cooling fan
PWM control
Auto Stop & Go (AS&Thou)
Non present
EV
Present
ETG Buzzer
Not nowadays
ETG Answerback
Not present
notation *: The setting can be changed past the option coding. Refer to .

PHEV-ECU CODING Information Listing


notation The items to be displayed may differ depending on the version of the Thou.U.T.-III.
Item proper name
Initial value
IMMOBILIZER
Present
Adaptive Cruise Command
Non present/Present
Paddle Shift
Not present/Present
Electric Heater for A/C
Not present/Present
Tyre Circumference
2155 mm
EV Remote System
Non nowadays
Speed Limit Function
Present
Prowl Control
Present

OPTION CODING


caution
  • If there is any particular indicated by the option coding later on equipment change, gear up ETACS-ECU then that the option coding data corresponds with the equipment content. Pay attending to that the concerned functions and systems do non piece of work normally if the setting does not correspond with the equipment.
  • With the ETACS functions existence customised, if whatever of the ETACS-ECU option coding items are changed, the customised contents are reset. In such example, the functions need to exist recustomised.
The ETACS-ECU option coding information can be checked or changed by operating M.U.T.-III.

  • How to check pick coding data

    1. Connect the M.U.T.-III. Refer to .
    2. Select "ETACS" on the organisation selection screen.
    3. Select "Coding."
    4. Select "Option Coding Information."
    5. Cheque the displayed pick coding information.

  • How to change option coding data

    1. Connect the M.U.T.-Iii. Refer to .
    2. Select "ETACS" on the system selection screen.
    3. Select "Coding."
    4. Select "Option Coding."
    5. Change to correct option coding data.

LIST <ETACS-ECU>
Item name
Auto lamp control
Keyless entry
AUDIO
RLS
Number of speaker
Radio Frequency
Front end fog lamp
Rear fog lamp
Horn blazon
Way Switch
Remote engine starter
AND
Compressor type
DRL function
Wiper washer bank check valve
ESS Cancel Role
EV REMOTE-ECU
Security blazon(EV REMOTE)
Panic Alarm
Door Unlock Mode Customize
Front wiper

Reference chart <PHEV-ECU>
Item name
EV Remote Arrangement
Speed Limit Function
Cruise Control

Source: http://mmc-autoelectric.org.ua/manuals/eur/outlander/2014/00/html/M100101500224500ENG.HTM

Posted by: knighteassom.blogspot.com

0 Response to "How To Change Heater Hose On 2006 Ford Focus"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel